Personnel Lifting Hydraulic Winches PL
TMA designs and manufactures customized winches to fully meet each individual application requirements.
Personnel lifting hydraulic winches have drums, gearboxes, motors and valves individually selected, based on the PL winch range. The result is a winch, which guarantees the highest levels of safety and reliability.
Each winch is dimensioned to comply with the rules pertaining to personnel lifting. Hoisting capacity in personnel lifting mode is up to 50% of the cargo hoisting capacity.
This range is suitable for marine applications, with stainless steel rope tensioners and marine surface treatments.
A wide range of accessories is available to complete the products: wire rope, pulley block, hook, tension roller, lower limit switch, load limiting device.
Special solutions, developed by TMA, allow for the installation of load limiting device or load detection device even on personnel lifting winches, where the secondary brake holds the drum.
VERSIONS
- Grooved Drum
- Special Grooved Drum
- Special Length Drum
- ATEX (Ex II 2G Ex h IIC T4 Gb)
- ATEX (Ex II 3G Ex h IIA T3 Gc)
- Class Approved
- Surface Marine Treatment
- Surface Flame Metallizing
- Tension Roller in Stainless Steel
ACCESSORIES
- Wire Rope
- Pulley Block
- Hook
- Tension Roller
- Lower Limit Switch
- Spooling Device
- Load Limiting System
- Load Detection System
- Emergency Lowering
- MOPS
- AOPS
- Constant Tension
CATALOGUE
VIDEO
Winch Model |
Line pull 1st Layer |
Working Pressure |
Max Line Speed |
Oil Flow |
Drum Diameter |
Cable Diameter |
Drum Capacity |
kg | bar | m/min | l/min | mm | mm | m | |
PL - 1 | 2000 | 175 | 37 | 80 | 290 | 13 | 220 |
PL - 2 | 3000 | 200 | 37 | 100 | 322 | 16 | 75 |
PL - 3 | 4000 | 160 | 30 | 100 | 366 | 18 | 100 |
PL - 4 | 5000 | 220 | 27 | 120 | 406 | 20 | 75 |
PL - 5 | 6000 | 250 | 28 | 120 | 418 | 22 | 100 |
PL - 6 | 7000 | 260 | 30 | 120 | 455 | 24 | 120 |
PL - 7 | 8000 | 290 | 38 | 220 | 505 | 26 | 120 |
PL - 8 | 10000 | 250 | 38 | 220 | 518 | 28 | 110 |